2" Woodgrain Faux Wood Blinds

All blinds come standard with 3 1/2" Vogue and Trapezoid bottom rail.

• Durable 2 x 2 color coordinated steel head rail. 
• Premium Cordless with wand tilt.

Like any wood furnishings, wood blinds should be dusted regularly to keep them looking new.  Use a soft, clean cloth, chemically treated dust cloth or dusting mitt.  Blinds may also be cleaned by vacuuming them with a brush attachment of a vacuum cleaner or by wiping with a soft, damp rag. 

Our manufacturer warrants that Faux wood blinds from this collection will be free from defects in materials and workmanship for as long as original purchasor owns the products.  See additional information on warranty page.

Wood Blinds - Measuring and Installation.

Finished Dimensions

Inside Mount Allowance-As with all product, factory will take standard deduction off of width for all blinds ordered as inside mount.  This deduction is ordered width minus 1/2".  No deductions will be taken off of length.

Outside Mount Allowance- No deductions will be taken off of width or length for blinds ordered as outside mount.

Valances

All valances for blinds ordered as inside mount will be cut straight on both ends and will be 1/8" less then ordered width unless otherwise specified.  If you need outside mount valances on your inside mount blinds or have any other valance instructions please specify on special comments on the order screen. 

All valances for blinds ordered as outside mount will have mitered corners with 2 5/8" returns.  The valances themselves will be approximately 1/2 wider then the blinds ordered width to fit over headrail and brackets.   If you need special returns sizes or special instructions for your valances please list this under the order comments section of the order screen.

All special valance comments must be made at time of order.  Replacement valances due to consumer not specifying instructions at time of order may result in a charge if a new valance needs to be supplied.  

Mounting Requirements Inside Mount

Minimum Casement Depth for bracket attachment 1 1/2"

Minimum Casement Depth for fully recessed blind and valance is 3"

Mounting Requirements for Outside Mount

Minimum flat mounting surface height 1 3/4"

Recommended width overlap per side 1 1/2"

Control Options

Standard Cordless control-maximum width and length 84".

Blinds between then 8 1/2" and 12 1/2" width (net) must will be center tilt only.  There will not be a lift control.

If you like this product you might want to check out our line of 2" Select Wood blinds. 

You may also want to look at Faux Wood Blinds.  An economical alternative to fit in any decor.