Embossed 2" Cordless Faux Wood Blinds

All blinds come standard with 3 1/2" Vogue and Trapezoid bottom rail. Decorative cloth tapes allows to you furthure customize this product to match your rooms decor. 

• Durable 2 x 2 color coordinated steel head rail. 
• Premium cordless feature with wand tilt.

Like any wood furnishings, wood blinds should be dusted regularly to keep them looking new.  Use a soft, clean cloth, chemically treated dust cloth or dusting mitt.  Blinds may also be cleaned by vacuuming them with a brush attachment of a vacuum cleaner or by wiping with a soft, damp rag. 

Our manufacturer warrants that Faux wood blinds from this collection will be free from defects in materials and workmanship for as long as original purchasor owns the products.  See additional information on warranty page.

A great customize your blinds is cloth tape.  This allows you to choose a 1 1/2" wide cloth tape that will be used in conjunction with braided ladder to help support the slats.  The cloth tapes come in a variety of colors to further enhance the decor of your home.

Faux Wood Blinds - Measuring and Installation.

Finished Dimensions

Inside Mount Allowance-As with all product, factory will take standard deduction off of width for all blinds ordered as inside mount.  This deduction is ordered width minus 1/2".  No deductions will be taken off of length.

Outside Mount Allowance- No deductions will be taken off of width or length for blinds ordered as outside mount.

Valances

All valances for blinds ordered as inside mount will be cut straight on both ends and will be 1/8" less then ordered width unless otherwise specified. If you need outside mount valances on your inside mount blinds or have any other valance instructions please specify on special comments on the order screen. 

All valances for ordered as outside mount will have mitered corners with 2 5/8" returns.  The valance will be approximately 1/2 wider then the blinds ordered width to fit over headrail and brackets. If you need special returns sizes or special instructions for your valances please list this under the order comments section of the order screen.

All special valance comments must be made at time of order.  Replacement valances due to consumer not specifying instructions at time of order may result in a charge if a new valance needs to be supplied.  

Mounting Requirements Inside Mount

Minimum Casement Depth for bracket attachment 1 1/2"

Minimum Casement Depth for fully recessed blind and valance is 3"

Mounting Requirements for Outside Mount

Minimum flat mounting surface height 1 3/4"

Recommended width overlap per side 1 1/2"

Minimum net width  8 1/2"

Minimum net width of blind with decorative tapes 8 1/2"

Maximum ordered width and length with Premium Cordlessis 84". The maximum width and length using Lift N Lock Cordless is 96"

Control Options

Standard control type is cordless lift with wand tilt.

Blinds less then 8 1/2" - 12 1/2" width (net) must will be tilt only.  There will not be a lift control.

If you like Faux Wood Blinds you may want to check out our line of Wood Blinds.  100% kiln dried hardwood offers an exceptional enhancement to any rooms decor.